Home › VW Jetta › Rear sway bar

Jetta · Handling

Jetta Rear sway bar Install Guide

Your Jetta

Pick your year to see what fits.

Flatter corners
Hard$250–$4201–2 hrs
All Jetta mods

Why do it

Cuts body roll and sharpens turn-in.

Tools you'll need

Starting out? See our budget tool list.

Parts to buy

Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.

Steps

  1. Prep the bar

    • Check the kit and shock mounts.
    Watch this step (H&R on a Mk4) (5:20–8:24)

  2. Install the bar

    • Fit the bar.
    Watch this step (8:24–12:46)

  3. Mount the bushings

    • Fit the bushings.
    Watch this step (12:46–18:02)

  4. Secure the clamps

    • Tighten the clamps.
    Watch this step (18:02–23:22)

  5. Remove the end links

    • Unbolt them.
    Watch this step (on a Mk5/Mk6) (2:47–3:23)

  6. Remove the old bar

    • Take it out.
    Watch this step (3:23–3:56)

  7. Prep the new bar

    • Grease the bushings.
    Watch this step (4:21–4:54)

  8. Install the bar

    • Fit it.
    Watch this step (4:54–6:26)

  9. Set the end links

    • Fit and adjust them.
    Watch this step (6:26–7:51)

  10. Remove the bar

    • Take off the factory bar.
    Watch this step (on a Mk7.5 GLI) (2:36–7:44)

  11. Fit the new bar

    • Fit it.
    Watch this step (10:23–11:59)

How to know it worked

Did this guide work for you?

Safety first

  • Park on flat ground, set the parking brake and chock the wheels.
  • Never get under a car held up only by a jack. Use jack stands.
  • Let the engine and exhaust cool first.
  • Disconnect the battery before unplugging electrical parts.
  • Wear safety glasses.
  • If something doesn't match your car, stop and ask a shop.

Follow your part's instructions and your service manual's torque specs.

Sway Bar install guides for other cars

More Jetta mods