Home › Acura Integra › Rear sway bar

Integra · Handling

Integra Rear sway bar Install Guide

Your Integra

Pick your year to see what fits.

This page covers the US Integra, not the Type R.

Flatter cornering
Hard$400–$4601–2 hrs
All Integra mods

Why do it

A stiffer rear bar cuts body roll and understeer.

Tools you'll need

Starting out? See our budget tool list.

Parts to buy

Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.

Steps

  1. Remove the stock parts

    • Take off the old bar.
    Watch this step (Progress, on a GS-R sedan) (0:32–1:15)

  2. Get the new bar ready

    • Set up the new bar.
    Watch this step (1:15–1:36)

  3. Fit the brace

    • Fit the brace.
    Watch this step (1:36–2:48)

  4. Fit the end links

    • Attach the end links.
    Watch this step (2:48–3:42)

  5. Torque it

    • Adjust and torque everything.
    Watch this step (3:42–5:22)

How to know it worked

Did this guide work for you?

Safety first

  • Park on flat ground, set the parking brake and chock the wheels.
  • Never get under a car held up only by a jack. Use jack stands.
  • Let the engine and exhaust cool first.
  • Disconnect the battery before unplugging electrical parts.
  • Wear safety glasses.
  • If something doesn't match your car, stop and ask a shop.

Follow your part's instructions and your service manual's torque specs.

Sway Bar install guides for other cars

More Integra mods