Home › Acura Integra › Front brake pads

Integra · Brakes

Integra Front brake pads Install Guide

Your Integra

Pick your year to see what fits.

This page covers the US Integra, not the Type R.

Stronger stops
Medium$140–$1601 hr
All Integra mods

Why do it

Performance pads bite harder and fade less than worn stock pads.

Tools you'll need

Starting out? See our budget tool list.

Parts to buy

Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.

Before you start

  • Pump the pedal until it's firm before you drive. Never let the caliper hang by its hose.

Steps

  1. Remove the caliper

    • Slide the pin out and move the caliper away.
    Watch this step (NutzAboutBolts, on a GS-R) (0:17–2:07)

  2. Clean the bracket

    • Take off the bracket with the 17mm bolts and line it back up.
    Watch this step (2:07–5:45)

  3. Fit the pads

    • Push the piston back and fit the pads.
    Watch this step (5:45–7:03)

  4. Finish up

    • Pump the pedal and tighten the bolts.
    Watch this step (7:03–7:50)

How to know it worked

Did this guide work for you?

Safety first

  • Park on flat ground, set the parking brake and chock the wheels.
  • Never get under a car held up only by a jack. Use jack stands.
  • Let the engine and exhaust cool first.
  • Disconnect the battery before unplugging electrical parts.
  • Wear safety glasses.
  • If something doesn't match your car, stop and ask a shop.

Follow your part's instructions and your service manual's torque specs.

Brake Pad install guides for other cars

More Integra mods