Home › Acura Integra › Rear brake pads
Integra · Brakes
Integra Rear brake pads Install Guide
Your Integra
Pick your year to see what fits.
This page covers the US Integra, not the Type R.
Stronger stops
Medium$140–$1601 hr
Why do it
Matches the rear to better front pads.
Tools you'll need
- Jack and 4 jack stands
- Socket set
- C-clamp or piston tool
- Brake grease
- Brake cleaner
- Torque wrench
Starting out? See our budget tool list.
Parts to buy
- Hawk HPS HB350F.496 Rear pads.Fits 1994–2001
Doesn't fit your car (0)
Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.
Before you start
- Pump the pedal until it's firm before you drive. Never let the caliper hang by its hose.
Steps
Remove the brake parts
- Take off the caliper.
Remove the bracket
- Detach the bracket.
Get the pads ready
- Grease the slides and pad backs.
Compress the piston
- Screw the piston back in.
Put it back
- Fit the pads and refit everything.
How to know it worked
- Brake pedal is firm before the car moves.
- Bed the new pads in with several firm stops.
- No grinding or squealing.
Did this guide work for you?
Fixes from the community:
Suggest a fix
For:
Safety first
- Park on flat ground, set the parking brake and chock the wheels.
- Never get under a car held up only by a jack. Use jack stands.
- Let the engine and exhaust cool first.
- Disconnect the battery before unplugging electrical parts.
- Wear safety glasses.
- If something doesn't match your car, stop and ask a shop.
Follow your part's instructions and your service manual's torque specs.