Home › Mitsubishi Lancer › Aftermarket tail lights
Lancer · Cosmetic
Lancer Aftermarket tail lights Install Guide
Your Lancer
Pick your year to see what fits.
Cleaner rear end
Easy$120–$40030–60 min
Why do it
New tail lights are one of the easiest ways to update the back of the car.
Tools you'll need
- Socket set
- Screwdrivers
- Trim tool
Starting out? See our budget tool list.
Parts to buy
- Spec-D tail lights (2008-2017) Listed for these years.Fits 2008–2017 · 2.0L Turbo Ralliart, 2.0L DE, ES or SE, 2.4L GTS or GT, Evo X
Doesn't fit your car (0)
Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.
Before you start
- Turn the lights off before you unplug anything.
Steps
Remove the old lights
- Take them out.
Wire the new lights
- Connect the wiring.
Reassemble
- Refit the trim.
How to know it worked
- Brake lights, signals and reverse lights all work.
- No gaps around the lights.
- No water gets into the trunk.
Did this guide work for you?
Fixes from the community:
Suggest a fix
For:
Safety first
- Park on flat ground, set the parking brake and chock the wheels.
- Never get under a car held up only by a jack. Use jack stands.
- Let the engine and exhaust cool first.
- Disconnect the battery before unplugging electrical parts.
- Wear safety glasses.
- If something doesn't match your car, stop and ask a shop.
Follow your part's instructions and your service manual's torque specs.