Home › Hyundai Genesis Coupe › Lowering springs

Genesis Coupe · Handling

Genesis Coupe Lowering springs Install Guide

Your Genesis Coupe

Pick your year to see what fits.

This page covers the US Genesis Coupe.

Fixes the wheel gap
Hard$370–$3703–5 hrs
All Genesis Coupe mods

Why do it

Drops the car and fixes the factory wheel gap.

Tools you'll need

Starting out? See our budget tool list.

Parts to buy

Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.

Before you start

  • A cheap spring compressor can fail. Use a good one, or have a shop swap the springs.
  • Book an alignment before you start.

Steps

  1. Remove the front struts

    • Take them off.
    Watch this step (AC Auto, on a Genesis Coupe) (1:02–5:53)

  2. Take the strut apart

    • Compress the spring and take it apart.
    Watch this step (5:53–8:58)

  3. Fit the front springs

    • Fit them and reinstall.
    Watch this step (8:58–12:17)

  4. Do the rear

    • Swap the rear springs.
    Watch this step (12:17–17:00)

How to know it worked

Did this guide work for you?

Safety first

  • Park on flat ground, set the parking brake and chock the wheels.
  • Never get under a car held up only by a jack. Use jack stands.
  • Let the engine and exhaust cool first.
  • Disconnect the battery before unplugging electrical parts.
  • Wear safety glasses.
  • If something doesn't match your car, stop and ask a shop.

Follow your part's instructions and your service manual's torque specs.

Lowering Spring install guides for other cars

More Genesis Coupe mods