Home › Hyundai Genesis Coupe › Cold air intake

Genesis Coupe · Power

Genesis Coupe Cold air intake Install Guide

Your Genesis Coupe

Pick your year to see what fits.

This page covers the US Genesis Coupe.

+5–15 whp (est.)
Medium$370–$4201 hr
All Genesis Coupe mods

Why do it

Pulls cooler air for more power and better sound.

Tools you'll need

Starting out? See our budget tool list.

Parts to buy

Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.

Steps

  1. Remove the air box

    • Take off the air filter box.
    Watch this step (AC Auto, K&N on a 2.0T) (0:43–1:22)

  2. Disconnect the tube

    • Disconnect it at the turbo.
    Watch this step (1:22–2:50)

  3. Fit the new intake

    • Fit the grommet and the intake.
    Watch this step (2:50–3:46)

  4. Reconnect

    • Connect the vacuum hose and finish up.
    Watch this step (3:46–4:59)

  5. Remove the factory air box

    • Turn off the car, remove the screws, unclip the harness and take out the box.
    Watch this step (AEM on a 2013-2015) (1:36–3:04)

  6. Fit the new parts

    • Fit the bolt, coupler and hose clamps.
    Watch this step (3:04–4:22)

  7. Finish up

    • Connect the sensor and refit the scoop.
    Watch this step (4:22–5:33)

How to know it worked

Did this guide work for you?

Safety first

  • Park on flat ground, set the parking brake and chock the wheels.
  • Never get under a car held up only by a jack. Use jack stands.
  • Let the engine and exhaust cool first.
  • Disconnect the battery before unplugging electrical parts.
  • Wear safety glasses.
  • If something doesn't match your car, stop and ask a shop.

Follow your part's instructions and your service manual's torque specs.

Cold Air Intake install guides for other cars

More Genesis Coupe mods