Home › Chevy Cobalt SS › Rear sway bar
Cobalt SS · Handling
Cobalt SS Rear sway bar Install Guide
Your Cobalt SS
Pick your year to see what fits.
This page covers the US Cobalt SS.
Flatter cornering
Medium$200–$3001–2 hrs
Why do it
Cuts body roll and understeer.
Tools you'll need
- Jack and 4 jack stands
- Socket set
- Torque wrench
Starting out? See our budget tool list.
Parts to buy
- Progress 22mm rear bar 62.0430 Lists the 2005-2010 Cobalt SS.Fits 2005–2010
Doesn't fit your car (0)
Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.
Steps
Fit the first side
- Hold up the bar and start the bolts.
Finish up
- Fit the other side and tighten it all.
How to know it worked
- No clunks over bumps.
- Flatter in corners.
Did this guide work for you?
Fixes from the community:
Suggest a fix
For:
Safety first
- Park on flat ground, set the parking brake and chock the wheels.
- Never get under a car held up only by a jack. Use jack stands.
- Let the engine and exhaust cool first.
- Disconnect the battery before unplugging electrical parts.
- Wear safety glasses.
- If something doesn't match your car, stop and ask a shop.
Follow your part's instructions and your service manual's torque specs.
Sway Bar install guides for other cars