Home › Chevy Cobalt SS › Cold air intake

Cobalt SS Cold air intake Install Guide

Why do it

Tools you'll need

• Socket set
• Screwdrivers
• Socket set
• Thread locker

Starting out? See our budget tool list.

Parts to buy

• ZZP 3 inch LSJ intake The same brand as our video.Fits 2005–2007 · 2.0L supercharged

Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.

Steps

1. Remove the stock intake

   • Take off the clamp and stock intake.
   ▶ Watch this step (ZZPerformance, on a Cobalt SS) (6:12–10:51)

2. Fit the new intake

   • Fit the coupler and new intake, then tighten it.
   ▶ Watch this step (13:55–18:40)

3. Remove the stock parts

   • Pull the vent hose and loosen the clamp.
   ▶ Watch this step (AirIntakeReviews, on a turbo Cobalt SS) (0:35–1:37)

4. Fit the heat shield

   • Fit the hardware and silicone hose.
   ▶ Watch this step (1:37–2:41)

5. Fit the tube and filter

   • Set the shield in and fit the tube and filter.
   ▶ Watch this step (2:41–3:30)

How to know it worked

• No check engine light.
• No leaks at the clamps.
• No check engine light.
• No leaks at the clamps.

Follow your part's instructions and your service manual's torque specs.

Cold Air Intake install guides for other cars

More Cobalt SS mods

• Cobalt SS Cat-back exhaust
• Cobalt SS Lowering springs
• Cobalt SS Rear sway bar
• Cobalt SS Spark plugs