Home › Acura TL › Lowering springs
TL · Handling
TL Lowering springs Install Guide
Your TL
Pick your year to see what fits.
This page covers the US TL.
Lower and flatter
Hard$270–$4703–4 hrs
Why do it
Drops the car and cuts roll.
Tools you'll need
- Jack and 4 jack stands
- Socket set
- Torque wrench
- Quality spring compressor
- Penetrating oil
Starting out? See our budget tool list.
Parts to buy
- H&R sport springs HRS50104 Lists the 2004-2008 TL.Fits 2004–2008
Doesn't fit your car (0)
Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.
Before you start
- A cheap spring compressor can fail. Use a good one, or have a shop swap the springs.
- Book an alignment before you start.
Steps
Pull the rear struts
- Loosen the struts and take them out.
Swap the springs
- Compress and swap, keeping the parts in order.
Refit and finish
- Bolt it back in, and set it on the ground.
How to know it worked
- Car sits level and lower.
- No clunks or rubbing.
- Steering is straight after the alignment.
Did this guide work for you?
Fixes from the community:
Suggest a fix
For:
Safety first
- Park on flat ground, set the parking brake and chock the wheels.
- Never get under a car held up only by a jack. Use jack stands.
- Let the engine and exhaust cool first.
- Disconnect the battery before unplugging electrical parts.
- Wear safety glasses.
- If something doesn't match your car, stop and ask a shop.
Follow your part's instructions and your service manual's torque specs.
Lowering Spring install guides for other cars