Home › Audi TT › Front sway bar

TT · Handling

TT Front sway bar

Your TT

Pick your year to see what fits.

There was no 2007 TT in the US. The 225, 3.2 and TTS are always quattro, and every TT from 2010 on is quattro.

Flatter cornering
Hard$325–$3602–4 hrs
All TT mods

Why do it

A stiffer front bar cuts body roll in corners and makes the car feel more planted.

Tools you'll need

Starting out? See our budget tool list.

Parts to buy

Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.

Before you start

  • This one is a tight fit, so give yourself time.

Steps

  1. Remove the stock bar

    • Raise the car and undo the end links and brackets.
    Watch this step (on a TT 225 quattro) (2:12–4:26) Watch the tight spots (4:26–5:43)

  2. Fit the new bar

    • Fit the new bar, brackets and end links, then torque everything with the car at ride height.
    Watch this step (5:43–7:14) Watch the install finish (7:14–10:23)

How to know it worked

Did this guide work for you?

Safety first

  • Park on flat ground, set the parking brake and chock the wheels.
  • Never get under a car held up only by a jack. Use jack stands.
  • Let the engine and exhaust cool first.
  • Disconnect the battery before unplugging electrical parts.
  • Wear safety glasses.
  • If something doesn't match your car, stop and ask a shop.

Follow your part's instructions and your service manual's torque specs.