Home › Honda S2000 › Front brake pads

S2000 · Brakes

S2000 Front brake pads Install Guide

Your S2000

Pick your year to see what fits.

This page covers the US S2000.

Stronger stops
Medium$160–$1801 hr
All S2000 mods

Why do it

Performance pads bite harder and fade less than worn stock pads.

Tools you'll need

Starting out? See our budget tool list.

Parts to buy

Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.

Before you start

  • Pump the pedal until it's firm before you drive. Never let the caliper hang by its hose.

Steps

  1. Remove the caliper

    • Remove the wheel and guide pin bolts.
    Watch this step (DIYGuys, on an S2000) (0:06–0:47)

  2. Clean the slide pins

    • Pull the pins and clean them.
    Watch this step (0:47–1:23)

  3. Fit the new pads

    • Lube the backing plates and fit the pads.
    Watch this step (1:23–1:51)

  4. Refit the caliper

    • Refit the caliper and torque it.
    Watch this step (1:51–2:35)

How to know it worked

Did this guide work for you?

Safety first

  • Park on flat ground, set the parking brake and chock the wheels.
  • Never get under a car held up only by a jack. Use jack stands.
  • Let the engine and exhaust cool first.
  • Disconnect the battery before unplugging electrical parts.
  • Wear safety glasses.
  • If something doesn't match your car, stop and ask a shop.

Follow your part's instructions and your service manual's torque specs.

Brake Pad install guides for other cars

More S2000 mods