Home › Infiniti Q50 › Sway bars

Q50 · Handling

Q50 Sway bars

Your Q50

Pick your year to see what fits.

3.0t cars make 300 hp, or 400 hp on the Red Sport.

Flatter cornering
Hard$515–$5152–4 hrs
All Q50 mods

Why do it

Stiffer bars cut body roll without a harsher ride.

Tools you'll need

Starting out? See our budget tool list.

Parts to buy

Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.

Steps

  1. Remove the rear parts

    • Raise the rear and undo what's in the way.
    Watch this step (STILLEN rear bar on a Q50) (3:23–5:25)

  2. Remove the rear bar

    • Take out the stock bar.
    Watch this step (5:25–8:21)

  3. Prepare the new bar

    • Grease the bushings.
    Watch this step (8:21–11:00)

  4. Fit the rear bar

    • Bolt it in.
    Watch this step (11:00–12:26)

  5. Fit the front bar

    • Swap the front bar the same way.
    Watch the front (Hotchkis bars on a Q50) (12:19–14:44)

How to know it worked

Did this guide work for you?

Safety first

  • Park on flat ground, set the parking brake and chock the wheels.
  • Never get under a car held up only by a jack. Use jack stands.
  • Let the engine and exhaust cool first.
  • Disconnect the battery before unplugging electrical parts.
  • Wear safety glasses.
  • If something doesn't match your car, stop and ask a shop.

Follow your part's instructions and your service manual's torque specs.