Home › Infiniti G35 › Lowering springs
G35 · Handling
G35 Lowering springs
Your G35
Pick your year to see what fits.
This page covers the G35 coupe and sedan.
Fixes the wheel gap
Hard$279–$2793–5 hrs
Why do it
Drops the car and fixes the factory wheel gap.
Tools you'll need
- Jack and 4 jack stands
- Socket set
- Torque wrench
- Quality spring compressor
- Penetrating oil
- Jack and 4 jack stands
- Socket set
- Torque wrench
- Quality spring compressor
- Penetrating oil
Starting out? See our budget tool list.
Parts to buy
- RS-R Down Sus springs (2003-2007 2dr RWD) For the coupe.Fits 2003–2007 · coupe only · RWD only
- RS-R Down Sus springs (2003-2006 4dr RWD) For the sedan.Fits 2003–2006 · sedan only · RWD only
Doesn't fit your car (0)
Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.
Before you start
- A cheap spring compressor can fail. Use a good one, or have a shop swap the springs.
- Book an alignment before you start.
- A cheap spring compressor can fail. Use a good one, or have a shop swap the springs.
- Book an alignment before you start.
Steps
Do the front
- Remove the strut, swap the spring and refit it.
Do the rear
- Remove the rear strut, swap the spring and refit it. Get it aligned.
Do the front
- Remove the strut, swap the spring and refit it.
Do the rear
- Remove the rear strut, swap the spring and refit it. Get it aligned.
How to know it worked
- Car sits level and lower.
- No clunks or rubbing.
- Steering is straight after the alignment.
- Car sits level and lower.
- No clunks or rubbing.
- Steering is straight after the alignment.
Did this guide work for you?
Fixes from the community:
Suggest a fix
For:
Safety first
- Park on flat ground, set the parking brake and chock the wheels.
- Never get under a car held up only by a jack. Use jack stands.
- Let the engine and exhaust cool first.
- Disconnect the battery before unplugging electrical parts.
- Wear safety glasses.
- If something doesn't match your car, stop and ask a shop.
Follow your part's instructions and your service manual's torque specs.