Home › Ford Fiesta ST › Lowering springs
Fiesta ST · Handling
Fiesta ST Lowering springs Install Guide
Your Fiesta ST
Pick your year to see what fits.
This page covers the US Fiesta ST.
Lower and flatter
Hard$380–$4103–4 hrs
Why do it
Drops the car and cuts body roll.
Tools you'll need
- Jack and 4 jack stands
- Socket set
- Torque wrench
- Quality spring compressor
- Penetrating oil
Starting out? See our budget tool list.
Parts to buy
- Eibach Pro-Kit 35143.140 Listed for the Fiesta ST.Fits 2014–2019
Doesn't fit your car (0)
Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.
Before you start
- A cheap spring compressor can fail. Use a good one, or have a shop swap the springs.
- Book an alignment before you start.
Steps
Remove the front struts
- Unbolt and pull out the front struts.
Swap the front springs
- Compress and swap the springs.
Swap the rear springs
- Drop the beam and swap the rear springs.
How to know it worked
- Car sits level and lower.
- No clunks or rubbing.
- Steering is straight after the alignment.
Did this guide work for you?
Fixes from the community:
Suggest a fix
For:
Safety first
- Park on flat ground, set the parking brake and chock the wheels.
- Never get under a car held up only by a jack. Use jack stands.
- Let the engine and exhaust cool first.
- Disconnect the battery before unplugging electrical parts.
- Wear safety glasses.
- If something doesn't match your car, stop and ask a shop.
Follow your part's instructions and your service manual's torque specs.
Lowering Spring install guides for other cars