Home › Dodge Challenger › Coilovers
Challenger · Handling
Challenger Coilovers
Your Challenger
Pick your year to see what fits.
This page covers the 2008–2023 Challenger.
Adjustable height
Hard$1,000–$1,6004–6 hrs
Why do it
Lets you set the height and cut body roll, for a big car that feels smaller.
Tools you'll need
- Jack and 4 jack stands
- Socket set
- Torque wrench
- Penetrating oil
- Coilover wrenches (usually included)
Starting out? See our budget tool list.
Parts to buy
- StreetPlus coilover kit TH-D802 (2008-2023 RWD) Listed for 2008-2023 RWD Challengers. Not for AWD GT cars.Fits 2008–2023
Doesn't fit your car (0)
Double-check fitment before buying. We may earn a commission when you buy through these links, at no extra cost to you.
Before you start
- Book an alignment before you start. You need one right after.
- Soak all the bolts in penetrating oil first.
Steps
Remove the front struts
- Remove the wheel and undo the bolts holding the strut.
Prepare the coilovers
- Set the height on the bench before they go in.
Fit the front coilovers
- Put them in and start all the bolts.
Remove the rear suspension
- Take out the rear shocks and springs.
Fit the rear coilovers
- Put them in, tighten everything and get it aligned.
How to know it worked
- Car sits level at your height.
- No clunks or rubbing.
- Steering is straight after the alignment.
Did this guide work for you?
Fixes from the community:
Suggest a fix
For:
Safety first
- Park on flat ground, set the parking brake and chock the wheels.
- Never get under a car held up only by a jack. Use jack stands.
- Let the engine and exhaust cool first.
- Disconnect the battery before unplugging electrical parts.
- Wear safety glasses.
- If something doesn't match your car, stop and ask a shop.
Follow your part's instructions and your service manual's torque specs.